Sarach
Naetimaetee/ShutterstockKeeping your computer plugged into the charger
all the time, even when you’re not using it, is bad for the battery.
Katsch says that your computer battery should never be at a full charge
or no charge at all. So, don’t keep your computer plugged in all day and
don’t use it until it dies. Keeping the charge between 50-80% is ideal.
Katsch recommends plugging in your computer in the morning, and then
once it’s fully charged, keep it unplugged for the rest of the day.
These tips will help to make your computer faster.
You could always just keep the content centered (or left aligned) on the page at a normal width, say 960 or 1024px which would allow it to be readable. To fill up the extra space on the sides you could use a gradient, clever shadows, or some images to “fill” up the blank space. My site maxes out at 960px so it looks the same on 1600 wide monitors, and 1900 wide monitors and beyond. A word of advice- when designing for large screen, testing or actually designing for a large screen is really helpful- it is hard to visualize a large screen when working on a 13″ laptop. Reply ↓
JavaScript is used all over the web and can provide detailed information about your system to any website that uses it. This is almost always used completely harmlessly and is often used to improve your browsing experience or funnel more personalised and relevant adverts your way. However, some of this personal or system information can and has been leaked in the past. Disabling JavaScript completely is not really a viable solution as a large amount of websites require you to accept JavaScript in order for them to display correctly. However, you can install an extension into your browser that will allow you to blacklist or whitelist JavaScript activity, giving you more control over how and where your information is being used. NoScript and ScriptSafe are both popular choices and very easy to use.
I need help with the last step-housing the “hub.” I first thought of a fancy acrylic box with appropriate holes for wires, that I could then stash in a drawer and leave on. But the display has limited wire length, so it needs to be in the box as well. I want the screen to be independent from the box, so the hub can remain in a drawer while the screen is out. This led to my current idea: leave the box in the center sliding drawer of a desk, and mount the display in the desk surface. I have a desk at home with a glass pane over the wood top, so I could cut out a square in the wood and fit the display up against the glass. This way, the box is out of sight in the drawer, and the display is always viewable from the desk! Before I start sawing into my desk, though, I wanted to throw it out there to all of you. Any better ideas? I’m happy to hear them! Until next time…
Best Notepad Tricks
Did you know that you can also undo an undo, i.e. redo what you did using the CTRL + Y key combination? This feature is most useful, however, when you have to repeat a task, like pasting the same information into several locations.
Now, it's easy. In Contacts' preferences, click vCard then Enable private me card. Now, when you go to your Me card in Contacts – and you might have to define one first – and click Edit, you get a series of checkboxes next to each field to show whether it would be included when you share a card.
Shut down unused and highly intense appsnhungboon/ShutterstockIf you’re not using an app, make sure that you exit out of it. If they are running, they will use up your battery. Also limit the use of highly intense apps such as games and editing software, they use up a lot of energy and will drain your battery much faster. Make sure you know the ways that computer hackers get into your computer.
https://sharmatricks.com/
Streaming from your laptop or computer? Let your fingers do the navigating for precise, easy control. Hit Spacebar or Enter keys to pause/play. ‘PgDn’ also pauses, while ‘PgUp’ plays. F enables full-screen viewing, while Esc takes you out of it. Hold Shift and the Left Arrow to rewind, while Shift and the Right Arrow fast-forwards. Up and Down Arrows change volume, while M toggles for mute.
It might be the 21st century, but we're still using squiggles on a piece of paper to agree to all manner of things. If you are emailed a PDF to sign, though, you don't have to faff about printing it, signing it, then scanning it back in: you can actually sign it right in Mail.
The Parental Controls in OS X are simple, but there are plenty of options in there – some of which are useful for other things than preventing underage access. You can limit computer use to a certain length of time every day, set a 'bedtime' after which users won't be able to use the computer, limit the functions of the Finder, limit what apps that user can use and more.You could, for example, disallow a nervous computer user from modifying the Dock or changing their password.
Makers, we want to hear from you! Send us feedback on our site design, bugs, story ideas, maker community events and any other share-worthy thoughts. Name *Not Required Email Address For Follow Up *Not Required Write Your Feedback Here Thank you for the feedback! We can't guarantee a response to each submission, but we promise to think about every one.
Right-clicking a taskbar icon brings up that's program's Jump List—quick links to the most recent files you've opened with that program. Got a file or template you open often? Pin it to the Jump List by dragging it onto the program's taskbar icon, or by clicking the pin icon to the right of the file name in the Jump List itself. Jump Lists can skirt around Windows' frustrating refusal to pin individual folders to the taskbar, pinning folders to the Jump List instead.
Next, go to the Processes tab. This shows you what processes are currently running on your machine. While some of these are needed, some, like those associated with music and video players or cloud storage services (like Dropbox or Google Drive) can be disabled without causing any problems.
You can shut Windows down with a few button clicks. It all starts with Windows key + X to open the Quick Access Menu, followed by the U key to expand the Shut down or sign out options. Finally, press I to sign out, U to shut down, R to restart, H to hibernate, and S to sleep.
Before I started, I moved everything to an external hard drive, in case I seriously damaged anything. Then, I painstakingly removed the plastic body, setting the screws aside. Much to my horror, my dog decided to play with the parts tray, sending screws flying off the bench. Luckily, my feet have a way of finding them, especially in the dark! On the bright side, I successfully removed all of the crucial components, and the laptop can still be linked together and powered on.
JT Permalink to comment# April 5, 2015 Chris is a superstar of a CSS pro, but also a very nice dude. I emailed him a couple of times and he always responded to me. I give you and Paul Irish a lot of props. In the previous version of this article, Chris put everything in one big section. It was very helpful. I did the same thing below… Reply ↓
The iPhone comes with a feature that enables it to share its 3G or 4G mobile broadband connection with other devices (though this must be allowed by your network operator), making it perfect for getting your Mac online wherever you are. There are three ways to connect your Mac to your iPhone to share its signal: Wi-Fi, Bluetooth, and USB.To begin, go to the Personal Hotspot option in the iPhone's Settings menu, and turn it on. If you want to connect over Wi-Fi, find the Wi-Fi network created by the iPhone in your Mac's Wi-Fi options, select it, and enter the password shown in the iPhone.To connect using USB, plug your iPhone into your Mac and you should get a dialog that takes you to the Network section in System Preferences, from which you can select the iPhone. For Bluetooth, activate Bluetooth on both devices and pair them, and the connection option should again appear in System Preferences > Network.
Those taskbar icons can also be used to quickly launch a second (or third, or fourth, or…) instance of a program—a fresh browser window alongside an already populated one, for instance, or another Windows Explorer window.Doing so is easy: Just hold down the Shift button, then open the program as you normally would, either via a left click of the mouse or the aforementioned quick-launch keyboard trick. Boom! A new, clean version of the software appears alongside the one you already have open.
Preview is one one of the most under-appreciated apps on a Mac; especially in later versions of OS X, it became hugely powerful, and even for us at MacFormat, it does much of what we'd traditionally use a more elaborate and expensive application such as Photoshop for. Do yourself a favor: open an image in Preview and poke around the app's menus and interface to see what it can do.
Question: Using Camera in LaptopBy Pam H. 0 found this helpfulNovember 3, 2014I have a camera in my laptop, and I don't know how to use it. What should I do? By Pam H. Answer Was this helpful? YesBy cybergrannie November 5, 20140 found this helpfulAre you referring to the camera that lets other people see you when you are "talking" to them? In any case, computers are different so you will have to find this in your laptop manual.If you do not have a manual then research it on line. You will just have to have your laptop "name" and model number which is on your laptop. Usually you can find a manual to review on line or maybe print it out to keep for future reference.You can also just Google your question (include laptop name and model) and maybe find an answer that way.First - find the name and model number as this is necessary for anyone to be able to really answer your questions. Reply Was this helpful? Yes
With Mail since Yosemite, though (and in fact with the webmail version of Mail at icloud.com), you can email files up to 5GB in size. What in fact happens is that the attachment really gets uploaded to iCloud, and then a link is sent to your recipient where they have 30 days from which to download it.
For example, you can crop your image. Draw a selection with the regular Rectangular Selection tool then either hit Command+K or choose Crop from the Tools menu. Alternatively, show the Edit Toolbar and make a more complex selection either with the Instant Alpha tool (like in iWork) or use the Smart Lasso.
3. Adjust Your Settings While you'll still have to use the display and the keyboard, you can adjust the settings for each to reduce power consumption. One often overlooked power drain is keyboard backlighting. Unless you're in the dark and need the backlight just to make out each key, turn off the backlight entirely. You can typically assign a hotkey for this function.
This is very cool how you list every single devices. While is it very useful, it can be very daunting and overwhelming. I usually use 4 ranges for my site that it…. 1)smallest for wearable, 2)smaller for mobile phone, 3)medium for the tablet, and 4)large to max for laptop and desktop. Thank you again for the detailed list. That is a lot of work and I bow to you sir. Thank you again for awesome works on this site. I learned a lot from this site. Reply ↓
While you're in the Device Manager, you can also turn off any unused ports. Just like an extension cord left plugged into an outlet, these unused plugs still have power going through them, and losing some in the process. The actual impact on battery life will be minimal, but if you're desperate for another minute or two of life, this will help. Take a quick glance at your ports, and turn off anything that's not being used, like USB ports with nothing connected to them.
Submit a Comment Name* Email Comment Copy and paste this code: micuno * Leave this field empty Get the CSS-Tricks newsletter Cancel Reply Posting Code You may write comments in Markdown. This makes code easy to post, as you can write inline code like `
Using a keyboard and mouse with your PS4 is as easy as plugging them into the front of your console. Okay, you might not want to use them to go on the rampage in GTA V, but if you’re doing some form-filling or web browsing then it’s a lot easier than fiddling around with the DualShock 4. Most devices will work with no extra configuration required.
The menu bar has been a fixture on the Mac since it launched in 1984, but since OS X El Capitan, you can hide the menu bar. Open System Preferences, go to General, then click "Automatically hide and show the menu bar."
you have 1824px which yes is understandable, very large screens, larger then my imac monitor so therefore the grid system can expand. But then you have 1224px, ok this is larger then the resolution of my macbook but 1200px at least is my imac size and to me the standard size of any screen round a bout.
It used to be in Safari that if you wanted to delete caches and history, you only had the nuclear option: nix everything.Since Yosemite, though, when you choose Clear History and Website Data from the History menu of Safari, you get the option of covering your tracks by clearing data from the last hour, today, today and yesterday or, as before, from all time.It clears your history from all devices signed into your iCloud account too.
Finally, turn off or turn down the sound. If you need to hear, drop the sound down as low as you can, and consider switching from the laptop's larger speakers to a set of tiny earbuds to get the audio piped right to your ears. Whenever possible, just mute the laptop altogether. That way, the speakers won't be getting any power, and you'll buy yourself some more precious time.
Increase the number of items in Jump Lists If you come to lean heavily on Jump Lists (as yours truly does), there may eventually come a time when you have so many files pinned to programs that the default 10-item limit on Jump Lists just won't cut it. Fortunately, it's easy to alter the number of files displayed by Jump Lists.Right-click on the taskbar, select Properties, then open the Jump List tab in the dialog box that appears. Here, you'll find some basic tools that let you fiddle with how Jump Lists behave—including the number of items you want displayed when you open a Jump List. Set it to the number you desire (more than 15 to 20 gets unwieldy) and click OK to save your changes.
Mashable is a global, multi-platform media and entertainment company. Powered by its own proprietary technology, Mashable is the go-to source for tech, digital culture and entertainment content for its dedicated and influential audience around the globe.
In OS X 10.7, Preview gained the ability to add your signature to documents. To get started, go to the Signatures tab in Preview's preferences and then click the +. Now, sign your name in black ink on a small piece of white paper and hold it up to your Mac's webcam. Line it up and click Accept (making sure the 'Save this signature' option is checked if you want to use it in the future).Now open a document you want to sign, pop up the Edit Toolbar and click the signature icon – it looks like an S on a line next to a tiny X. Draw a box to add your signature on the form. You can scale and reposition it afterwards too.
Since Yosemite, clicking the green button at the top left of a window now takes that window full screen rather than maximizing it, but you can restore the old behavior by holding ⌥ as you hover over the green button.But, there's more! Hold ⌥ as you resize one side of a window and the window also resizes from the other side as well. Hold ⇧ and the window resizes proportionally, aligned to the opposite edge (which sounds a bit confusing but makes sense when you try it).Or, hold ⌥ and ⇧ when resizing a window for the whole thing to shrink down proportionally around the centre. Put it all together and you could click the green button to make a window fill the screen then resize one edge while holding ⌥ and ⇧ so that you make it smaller but keep it centered. OCD FTW!Word Count: 3013
You could always just keep the content centered (or left aligned) on the page at a normal width, say 960 or 1024px which would allow it to be readable. To fill up the extra space on the sides you could use a gradient, clever shadows, or some images to “fill” up the blank space. My site maxes out at 960px so it looks the same on 1600 wide monitors, and 1900 wide monitors and beyond. A word of advice- when designing for large screen, testing or actually designing for a large screen is really helpful- it is hard to visualize a large screen when working on a 13″ laptop. Reply ↓
JavaScript is used all over the web and can provide detailed information about your system to any website that uses it. This is almost always used completely harmlessly and is often used to improve your browsing experience or funnel more personalised and relevant adverts your way. However, some of this personal or system information can and has been leaked in the past. Disabling JavaScript completely is not really a viable solution as a large amount of websites require you to accept JavaScript in order for them to display correctly. However, you can install an extension into your browser that will allow you to blacklist or whitelist JavaScript activity, giving you more control over how and where your information is being used. NoScript and ScriptSafe are both popular choices and very easy to use.
I need help with the last step-housing the “hub.” I first thought of a fancy acrylic box with appropriate holes for wires, that I could then stash in a drawer and leave on. But the display has limited wire length, so it needs to be in the box as well. I want the screen to be independent from the box, so the hub can remain in a drawer while the screen is out. This led to my current idea: leave the box in the center sliding drawer of a desk, and mount the display in the desk surface. I have a desk at home with a glass pane over the wood top, so I could cut out a square in the wood and fit the display up against the glass. This way, the box is out of sight in the drawer, and the display is always viewable from the desk! Before I start sawing into my desk, though, I wanted to throw it out there to all of you. Any better ideas? I’m happy to hear them! Until next time…
Best Notepad Tricks
Did you know that you can also undo an undo, i.e. redo what you did using the CTRL + Y key combination? This feature is most useful, however, when you have to repeat a task, like pasting the same information into several locations.
Now, it's easy. In Contacts' preferences, click vCard then Enable private me card. Now, when you go to your Me card in Contacts – and you might have to define one first – and click Edit, you get a series of checkboxes next to each field to show whether it would be included when you share a card.
Shut down unused and highly intense appsnhungboon/ShutterstockIf you’re not using an app, make sure that you exit out of it. If they are running, they will use up your battery. Also limit the use of highly intense apps such as games and editing software, they use up a lot of energy and will drain your battery much faster. Make sure you know the ways that computer hackers get into your computer.
https://sharmatricks.com/
Streaming from your laptop or computer? Let your fingers do the navigating for precise, easy control. Hit Spacebar or Enter keys to pause/play. ‘PgDn’ also pauses, while ‘PgUp’ plays. F enables full-screen viewing, while Esc takes you out of it. Hold Shift and the Left Arrow to rewind, while Shift and the Right Arrow fast-forwards. Up and Down Arrows change volume, while M toggles for mute.
It might be the 21st century, but we're still using squiggles on a piece of paper to agree to all manner of things. If you are emailed a PDF to sign, though, you don't have to faff about printing it, signing it, then scanning it back in: you can actually sign it right in Mail.
The Parental Controls in OS X are simple, but there are plenty of options in there – some of which are useful for other things than preventing underage access. You can limit computer use to a certain length of time every day, set a 'bedtime' after which users won't be able to use the computer, limit the functions of the Finder, limit what apps that user can use and more.You could, for example, disallow a nervous computer user from modifying the Dock or changing their password.
Makers, we want to hear from you! Send us feedback on our site design, bugs, story ideas, maker community events and any other share-worthy thoughts. Name *Not Required Email Address For Follow Up *Not Required Write Your Feedback Here Thank you for the feedback! We can't guarantee a response to each submission, but we promise to think about every one.
Right-clicking a taskbar icon brings up that's program's Jump List—quick links to the most recent files you've opened with that program. Got a file or template you open often? Pin it to the Jump List by dragging it onto the program's taskbar icon, or by clicking the pin icon to the right of the file name in the Jump List itself. Jump Lists can skirt around Windows' frustrating refusal to pin individual folders to the taskbar, pinning folders to the Jump List instead.
Next, go to the Processes tab. This shows you what processes are currently running on your machine. While some of these are needed, some, like those associated with music and video players or cloud storage services (like Dropbox or Google Drive) can be disabled without causing any problems.
You can shut Windows down with a few button clicks. It all starts with Windows key + X to open the Quick Access Menu, followed by the U key to expand the Shut down or sign out options. Finally, press I to sign out, U to shut down, R to restart, H to hibernate, and S to sleep.
Before I started, I moved everything to an external hard drive, in case I seriously damaged anything. Then, I painstakingly removed the plastic body, setting the screws aside. Much to my horror, my dog decided to play with the parts tray, sending screws flying off the bench. Luckily, my feet have a way of finding them, especially in the dark! On the bright side, I successfully removed all of the crucial components, and the laptop can still be linked together and powered on.
JT Permalink to comment# April 5, 2015 Chris is a superstar of a CSS pro, but also a very nice dude. I emailed him a couple of times and he always responded to me. I give you and Paul Irish a lot of props. In the previous version of this article, Chris put everything in one big section. It was very helpful. I did the same thing below… Reply ↓
The iPhone comes with a feature that enables it to share its 3G or 4G mobile broadband connection with other devices (though this must be allowed by your network operator), making it perfect for getting your Mac online wherever you are. There are three ways to connect your Mac to your iPhone to share its signal: Wi-Fi, Bluetooth, and USB.To begin, go to the Personal Hotspot option in the iPhone's Settings menu, and turn it on. If you want to connect over Wi-Fi, find the Wi-Fi network created by the iPhone in your Mac's Wi-Fi options, select it, and enter the password shown in the iPhone.To connect using USB, plug your iPhone into your Mac and you should get a dialog that takes you to the Network section in System Preferences, from which you can select the iPhone. For Bluetooth, activate Bluetooth on both devices and pair them, and the connection option should again appear in System Preferences > Network.
Those taskbar icons can also be used to quickly launch a second (or third, or fourth, or…) instance of a program—a fresh browser window alongside an already populated one, for instance, or another Windows Explorer window.Doing so is easy: Just hold down the Shift button, then open the program as you normally would, either via a left click of the mouse or the aforementioned quick-launch keyboard trick. Boom! A new, clean version of the software appears alongside the one you already have open.
Preview is one one of the most under-appreciated apps on a Mac; especially in later versions of OS X, it became hugely powerful, and even for us at MacFormat, it does much of what we'd traditionally use a more elaborate and expensive application such as Photoshop for. Do yourself a favor: open an image in Preview and poke around the app's menus and interface to see what it can do.
Question: Using Camera in LaptopBy Pam H. 0 found this helpfulNovember 3, 2014I have a camera in my laptop, and I don't know how to use it. What should I do? By Pam H. Answer Was this helpful? YesBy cybergrannie November 5, 20140 found this helpfulAre you referring to the camera that lets other people see you when you are "talking" to them? In any case, computers are different so you will have to find this in your laptop manual.If you do not have a manual then research it on line. You will just have to have your laptop "name" and model number which is on your laptop. Usually you can find a manual to review on line or maybe print it out to keep for future reference.You can also just Google your question (include laptop name and model) and maybe find an answer that way.First - find the name and model number as this is necessary for anyone to be able to really answer your questions. Reply Was this helpful? Yes
With Mail since Yosemite, though (and in fact with the webmail version of Mail at icloud.com), you can email files up to 5GB in size. What in fact happens is that the attachment really gets uploaded to iCloud, and then a link is sent to your recipient where they have 30 days from which to download it.
For example, you can crop your image. Draw a selection with the regular Rectangular Selection tool then either hit Command+K or choose Crop from the Tools menu. Alternatively, show the Edit Toolbar and make a more complex selection either with the Instant Alpha tool (like in iWork) or use the Smart Lasso.
3. Adjust Your Settings While you'll still have to use the display and the keyboard, you can adjust the settings for each to reduce power consumption. One often overlooked power drain is keyboard backlighting. Unless you're in the dark and need the backlight just to make out each key, turn off the backlight entirely. You can typically assign a hotkey for this function.
This is very cool how you list every single devices. While is it very useful, it can be very daunting and overwhelming. I usually use 4 ranges for my site that it…. 1)smallest for wearable, 2)smaller for mobile phone, 3)medium for the tablet, and 4)large to max for laptop and desktop. Thank you again for the detailed list. That is a lot of work and I bow to you sir. Thank you again for awesome works on this site. I learned a lot from this site. Reply ↓
While you're in the Device Manager, you can also turn off any unused ports. Just like an extension cord left plugged into an outlet, these unused plugs still have power going through them, and losing some in the process. The actual impact on battery life will be minimal, but if you're desperate for another minute or two of life, this will help. Take a quick glance at your ports, and turn off anything that's not being used, like USB ports with nothing connected to them.
Submit a Comment Name* Email Comment Copy and paste this code: micuno * Leave this field empty Get the CSS-Tricks newsletter Cancel Reply Posting Code You may write comments in Markdown. This makes code easy to post, as you can write inline code like `
this
` or
multiline blocks of code in triple backtick fences (```) with double new
lines before and after. Code of Conduct Absolutely anyone is welcome to
submit a comment here. But not all comments will be posted. Think of it
like writing a letter to the editor. All submitted comments will be
read, but not all published. Published comments will be on-topic,
helpful, and further the discussion or debate. Want to tell us something
privately? Feel free to use our contact form. That's a great place to
let us know about typos or anything off-topic.Using a keyboard and mouse with your PS4 is as easy as plugging them into the front of your console. Okay, you might not want to use them to go on the rampage in GTA V, but if you’re doing some form-filling or web browsing then it’s a lot easier than fiddling around with the DualShock 4. Most devices will work with no extra configuration required.
The menu bar has been a fixture on the Mac since it launched in 1984, but since OS X El Capitan, you can hide the menu bar. Open System Preferences, go to General, then click "Automatically hide and show the menu bar."
you have 1824px which yes is understandable, very large screens, larger then my imac monitor so therefore the grid system can expand. But then you have 1224px, ok this is larger then the resolution of my macbook but 1200px at least is my imac size and to me the standard size of any screen round a bout.
It used to be in Safari that if you wanted to delete caches and history, you only had the nuclear option: nix everything.Since Yosemite, though, when you choose Clear History and Website Data from the History menu of Safari, you get the option of covering your tracks by clearing data from the last hour, today, today and yesterday or, as before, from all time.It clears your history from all devices signed into your iCloud account too.
Finally, turn off or turn down the sound. If you need to hear, drop the sound down as low as you can, and consider switching from the laptop's larger speakers to a set of tiny earbuds to get the audio piped right to your ears. Whenever possible, just mute the laptop altogether. That way, the speakers won't be getting any power, and you'll buy yourself some more precious time.
Increase the number of items in Jump Lists If you come to lean heavily on Jump Lists (as yours truly does), there may eventually come a time when you have so many files pinned to programs that the default 10-item limit on Jump Lists just won't cut it. Fortunately, it's easy to alter the number of files displayed by Jump Lists.Right-click on the taskbar, select Properties, then open the Jump List tab in the dialog box that appears. Here, you'll find some basic tools that let you fiddle with how Jump Lists behave—including the number of items you want displayed when you open a Jump List. Set it to the number you desire (more than 15 to 20 gets unwieldy) and click OK to save your changes.
Mashable is a global, multi-platform media and entertainment company. Powered by its own proprietary technology, Mashable is the go-to source for tech, digital culture and entertainment content for its dedicated and influential audience around the globe.
In OS X 10.7, Preview gained the ability to add your signature to documents. To get started, go to the Signatures tab in Preview's preferences and then click the +. Now, sign your name in black ink on a small piece of white paper and hold it up to your Mac's webcam. Line it up and click Accept (making sure the 'Save this signature' option is checked if you want to use it in the future).Now open a document you want to sign, pop up the Edit Toolbar and click the signature icon – it looks like an S on a line next to a tiny X. Draw a box to add your signature on the form. You can scale and reposition it afterwards too.
Since Yosemite, clicking the green button at the top left of a window now takes that window full screen rather than maximizing it, but you can restore the old behavior by holding ⌥ as you hover over the green button.But, there's more! Hold ⌥ as you resize one side of a window and the window also resizes from the other side as well. Hold ⇧ and the window resizes proportionally, aligned to the opposite edge (which sounds a bit confusing but makes sense when you try it).Or, hold ⌥ and ⇧ when resizing a window for the whole thing to shrink down proportionally around the centre. Put it all together and you could click the green button to make a window fill the screen then resize one edge while holding ⌥ and ⇧ so that you make it smaller but keep it centered. OCD FTW!Word Count: 3013
No comments:
Post a Comment